![]() |
Archaeological Handpicks (patiche)
|
|
|
|
|

Archaeological Handpicks (patiche) Feature:
Special digging radius
Pick-head radius with a focal point at the hand
grip/wrist pivot area to make cutting vertical balk
walls easier.
Deep handle shank
Extra deep internally reverse-tapered shank provides
a simple, strong, solid, and secure handle-to-pick
connection.
Hickory handle
Top-of-the-line 12" (305 mm) adze eye hickory
handle with weather-resistant clear lacquer and
silicone finish for a slip-resistant grip. Shaped for
maximum hand comfort. Best quality available,
manufactured from hickory with a density of at least
48 pounds per cubic foot. Wooden handle does not
collect heat in the sun, preventing the
"too-hot-to-touch" syndrome. Lighter than
metal or metal and leather handles, easier to keep
clean, and replaceable worldwide. Wood is also easier
on the hand because it helps to absorb the vibrations
that can numb the hand after day-long use.
15° beveled sides
Straight-edge 15° beveled sides allow for a natural
hand angle when using the pick like a trowel to rake
together loose rubble into a pile prior to removal
without losing leading edge contact with the ground.
This prevents the gathered material from
"escaping" from under the leading edge of
the pick.
Heat-treated alloy
steel
Heat-treated alloy steel tampered to hold an edge,
yet left soft enough to be easily re-grindable for a
blunter or sharper digging edge, or different pick
tip or hoe corner radius as desired.
Durable, quality
product
Pick heads are carefully manufactured one at a time
as a very high quality, precision thin-wall lost wax
casting. The stain-resistant steel alloy is used for
the pick's construction is the same tough,
stain-resistant steel used in mountain climbing
equipment where metal fatigue could mean death.
Designed to literally last more than a lifetime.
Four sizes - take
your pick!
To facilitate all aspects of excavation, the pick is
available in four sizes:
The Detailer -
For careful work around emerging artifacts. Hoe
width is 36 mm.
The Surveyor -
For general exploration as well as daily on-site
use. Hoe width is 40 mm.
The Expedition -
Designed for daily on-site production use. Hoe
width is 45 mm.
The Earthmover -
Excellent where dig site preparation work is
required to clear away large quantities of
overburden. Hoe width is 55mm.
Our picks are $39.95 each with bulk discounts:
| Quantity | Percent Discount | Price Per Pick |
|---|---|---|
| 4-5 | 10% | $35.96 |
| 6-10 | 15% | $33.96 |
| 11-20 | 20% | $31.96 |
| 21-50 | 25% | $29.96 |
| 51 and up | 30% | $27.97 |
|